Valuable Tips to Fix Brain-teaser Wireless Connection Problems

Well, the WiFi and Internet speed have both improved significantly over a decade. Also, data speeds are faster across the board and wireless connections are more reliable and secure than ever. Though, WiFi is nothing without issues and problems. So, hang out at a ‘Starbucks’ long enough and you can experience it in firsthand. Once you have set up your home network, here are some common issues that you may run into with WiFi and have capability of correcting them. Also, remember that LinksysWiFi Extender Login and Linksys WiFi Extender Setup issues can be fixed easily if you have a good internet connection.

1    Consider Checking LAN and WAN Connections

Did you know the fact that the physical connections are an oft-overlooked common culprit? It is a strange fact but true. To fix this issue, check all wireless access point (AP) to ensure that the Ethernet cables are inserted properly and link status LEDs are blinking green. If not, consider trying the following.

• First of all, verify that devices at both ends of each Ethernet cable are powered on. Also, remember that the Ethernet ports on them supposed to be enabled.
• Consider swapping Ethernet cables to isolate a damaged connector or cable.
• Also, check your router manual or the access point to ensure that you are using the right cable.
• Now, connect another Ethernet-capable device, such as a laptop, to the affected router port or the access point. In case, the link status LEDs changes, then the device that you just replaced may be failing link ‘auto-negotiation’. So, check port configurations at both ends and reconfigure as needed to match the duplex mode and its speed.

Note: If you want Cisco range extender setup without CD, do not ignore this step.     

2       Verify the Wireless Adapter

Dear users, it might seem obvious, but it's important to ensure the client's WiFi adapter used for network troubleshooting is enabled and ready to connect with other internet or wireless devices.

• Similarly, when using a ‘Windows client’, select your ‘wireless network adapter’ from the network connections control panel and check to see if its status is enabled or not. If it is not, then right-click in order to enable the connection. In case, this fails while using a laptop, then look for a ‘function key’ or ‘physical button’ or ‘slider-switch’ to take the laptop out of the airplane mode.
• Similarly, when using an Apple iOS client, consider using the settings app to verify your iPhone or iPad is not in airplane mode. For further information, contact our tech support team on 1-844-726-2726 (toll-free).
• Alternatively, on an Android client, use the settings app in a similar manner to verify that your smartphone or tablet is not in airplane mode and the WiFi is enabled.

Note: If you actually want to access extender.linksys.com, do not do the mistake of ignoring this step.

3.       Verify Access Point and the Router’s Settings

Consider using your wireless access point or router's administrative GUI to verify network settings for the wireless network service set identifier (SSID).

• Now, locate the SSID that you are troubleshooting. Conversely, on a basic wireless router, there supposed to be one SSID or one for each radio band i.e. 2.4 GHz and 5 GHz. Similarly, on a small business or enterprise AP, there may be several SSIDs used to separate wireless clients and their network traffic.
• After that, identify the IP subnet assigned to that particular SSID. Well, upon a successful connection, your WiFi client should receive a local IP address from the subnet.
• Moreover, identify the router or AP's local IP address that should be reachable through this subnet.
• Now, check your router's events log or status GUI to verify that an IP address from this subnet is indeed assigned to your WiFi client (when connected).

For more assistance, don’t delay in asking our tech support executive on toll-free number already mentioned above. Not only this, you can also ask them for linksys range extender setup instructions via extender.linksys any day any time.

4.       Check intermittent network connectivity issues

If your wireless client connects and pings successfully, but encounters intermittent network connectivity problems, then there are chances that you may be experiencing poor signal strength, RF interference, or disconnection caused by AP (access point) roaming. To get rid of such brainteaser issues, visit our website linksysextendersetup.tips for more advanced troubleshooting tips.